To implement transport mode ipsec configuration we have to complete the following steps:
- assign ipsec policy (ipsecinit.conf)
- configure Internet Key Exchange (IKE) daemon (in.iked) (config)
- setup preshared key secret (ike.preshared)
The configuration should be made on both of the communicating nodes.
In below example i've used nodes named sol10u6 (10.0.2.15) and sol10u7 (10.0.2.16).
To generate the password ascii representation i've used a piece of code:
/*
IKE password converter
- Marcin Wisnios [marcin AT wisnios.com]
*/
#include <stdio.h>
#include <string.h>
#define PSIZE 512
int main(int argc, char* argv[])
{
int n;
size_t size;
char pass[PSIZE];
if (argc == 1)
{
fprintf(stderr, "Usage: %s password\n", argv[0]);
}
else
{
size=strlen(argv[1]);
if (size >= PSIZE)
{
fprintf(stderr, "Warning: possibility of buffer overflow on oversized password (>=%d). Exiting.\n", PSIZE);
return -1;
}
strncpy(pass, argv[1], size);
for(n=0; n<size; n++)
{
printf("%d", pass[n]);
}
printf("\n");
}
return 0;
}
I've used
sample secret: example-preshared-key-secret-do-not-use-it.
sol10u6 [~]$ ./ikepconv example-preshared-key-secret-do-not-use-it
10112097109112108101451121141011151049711410110045107101121451151019911410111645100111451101111164511711510145105116
Let's start with ipsec policy settings.
Setup is as follows:
sol10u6 [~]# cat /etc/inet/ipsecinit.conf
[...]
{ laddr 10.0.2.15 raddr 10.0.2.16 } ipsec { encr_algs aes encr_auth_algs md5 sa shared }
sol10u7 [~]# cat /etc/inet/ipsecinit.conf
[...]
{ laddr 10.0.2.16 raddr 10.0.2.15 } ipsec { encr_algs aes encr_auth_algs md5 sa shared }
encr_algs aes - Use AES as Encapsulating Security Payload (ESP, IP Protocol: 50) encryption algorithm
encr_auth_algs md5 - Use MD5 as ESP authentication algorithm
sa shared - shared Security Association (SA) means the communication between the two nodes in one direction uses the same channel;
in opposite to "unique" which uses separate SA for each pair of source and destination ports
Apply IPSec policy to the system:
sol10u6 [~]# ipsecconf -a /etc/inet/ipsecinit.conf
sol10u6 [~]# ipsecconf
#INDEX 2
{ laddr 10.0.2.15 raddr 10.0.2.16 } ipsec { encr_algs aes encr_auth_algs md5 sa shared }
From now the communication is broken; IPSec has been instructed to encrypt and authenticate the traffic.
We need to provide the valid SA related to security policy.
To automate the process of key management I've used IKE daemon (in.iked).
It should be configured similary to below output:
sol10u6 [~]# cat /etc/inet/ike/config
[...]
### BEGINNING OF FILE
{
label "preshared"
local_id_type ip
local_addr 10.0.2.15
remote_addr 10.0.2.16
p1_xform
{ auth_method preshared oakley_group 5 encr_alg aes auth_alg md5 }
}
sol10u7 [~]# cat /etc/inet/ike/config
[...]
### BEGINNING OF FILE
{
label "preshared"
local_id_type ip
local_addr 10.0.2.16
remote_addr 10.0.2.15
p1_xform
{ auth_method preshared oakley_group 5 encr_alg aes auth_alg md5 }
}
oakley_group - The Oakley Diffie-Hellman group used for IKE SA key derivation. Acceptable values are currently 1 (768-bit), 2 (1024-bit), or 5 (1536-bit).
The last step is to configure the preshared secrets file.
sol10u6 [~]# cat /etc/inet/secret/ike.preshared
[...]
{
localidtype IP
localid 10.0.2.15
remoteidtype IP
remoteid 10.0.2.16
key 10112097109112108101451121141011151049711410110045107101121451151019911410111645100111451101111164511711510145105116
}
sol10u7 [~]# cat /etc/inet/secret/ike.preshared
[...]
{
localidtype IP
localid 10.0.2.16
remoteidtype IP
remoteid 10.0.2.15
key 10112097109112108101451121141011151049711410110045107101121451151019911410111645100111451101111164511711510145105116
}
key - continuous ASCII characters decimal representation of the passphrase "example-preshared-key-secret-do-not-use-it" (converted with
ikepconv from the beginning of my post).
That's it: e(101)x(120)a(97)m(109)p(112)l(108)e(101)-(45)...
Start IKE daemon:
sol10u6 [~]# /usr/lib/inet/in.iked -d [debug mode]
sol10u6 [~]# /usr/lib/inet/in.iked
It's time for a simple test.
sol10u7 [~]# ping 10.0.2.15
10.0.2.15 is alive
sol10u6 [~]# snoop -c 1 src host 10.0.2.16
Using device /dev/e1000g0 (promiscuous mode)
sol10u7 -> sol10u6 ESP SPI=0xc072b272 Replay=6
1 packets captured
sol10u7 [~]# ping 10.0.2.15
10.0.2.15 is alive
sol10u6 [~]# snoop -c 1 -v src host 10.0.2.16
Using device /dev/e1000g0 (promiscuous mode)
ETHER: ----- Ether Header -----
ETHER:
ETHER: Packet 1 arrived at 17:46:25.51503
ETHER: Packet size = 150 bytes
ETHER: Destination = 8:0:27:ba:19:34, PCS Computer Systems GmbH
ETHER: Source = 8:0:27:30:9c:39, PCS Computer Systems GmbH
ETHER: Ethertype = 0800 (IP)
ETHER:
IP: ----- IP Header -----
IP:
IP: Version = 4
IP: Header length = 20 bytes
IP: Type of service = 0x00
IP: xxx. .... = 0 (precedence)
IP: ...0 .... = normal delay
IP: .... 0... = normal throughput
IP: .... .0.. = normal reliability
IP: .... ..0. = not ECN capable transport
IP: .... ...0 = no ECN congestion experienced
IP: Total length = 136 bytes
IP: Identification = 9596
IP: Flags = 0x0
IP: .0.. .... = may fragment
IP: ..0. .... = last fragment
IP: Fragment offset = 0 bytes
IP: Time to live = 255 seconds/hops
IP: Protocol = 50 (ESP)
IP: Header checksum = 7da9
IP: Source address = 10.0.2.16, sol10u7
IP: Destination address = 10.0.2.15, sol10u6
IP: No options
IP:
ESP: ----- Encapsulating Security Payload -----
ESP:
ESP: SPI = 0xc072b272
ESP: Replay = 10
ESP: ....ENCRYPTED DATA....
1 packets captured
:
The IPSec definitions has been added to SMF in Solaris 10 update 7:
svc:/network/ipsec/manual-key:default
svc:/network/ipsec/ike:default
svc:/network/ipsec/ipsecalgs:default
svc:/network/ipsec/policy:default
Remember to enable ipsec/ike daemon service.
Enjoy.
View my profile